Water-based emulsion coatings

• HIGH GLOSS SINGLE-SIDE COATINGS

• Very high gloss coatings for quality carton and board.

• GLOSS WORK AND TURN COATINGS

• Water-based coatings that require sealing on both sides.

• NEUTRAL SEALERS FOR WORK AND TURN

• Coating which provides smooth, even reflectance over both ink and plain paper.

• FULL MATT COATING

• Coatings which give near to zero reflectance.

• LABEL COATINGS

• Gloss coating with resistance to sticking under hot glue application.

• FRAGRANCE COATINGS

• Formulated to specific fragrance requirements. Scent is only released when rubbed.

• STERILISATION COATINGS

• Resists the conditions in an autoclave, as used in medical packaging.  

• GREASE BARRIER COATING

• Water-based coating used to resist oil and grease.

• WATER BARRIER COATING

• Coatings where water resistance is required.

• FOOD CONTACT COATINGS

• Coatings which exhibit low residual odour and taint potential. formulated for compliance to FDA leglislation, for food packaging.

• HEAT RESIST COATINGS

• Resist sticking to metal heat seal jaws, also heat seal film release (cigarette packaging).

• BLISTER PACK COATINGS

• Gloss coating used in line or offline to produce heat sealable blister cards (battery and display packaging).

• PRIMERS FOR LAMINATION

• Coatings with high adhesion and flexibility for subsequent coating with UV lacquer, lamination or foil blocking.

• NON-SLIP COATINGS

• Coatings which give cartons grip on conveyor packaging lines.

• ALKALI RESIST COATINGS

• Coatings for detergent packaging.

• ALCOHOL RESIST COATINGS

• Coatings which are not affected by contact with alcohol, ie. perfume packaging or liquor labelling.  

• HOT METAL RELEASE COATING

• Coating to resist sticking or damage to print when reverse blister packing, or board-to-board sealing.  

• POLYBOARD COATINGS

• Fast drying coating to prevent set off when printing polyethylene coated boards. Allows full stack printing.

• METALLIC INK COATINGS

• Coatings with good adhesion to offset metallic inks, giving protection and gloss.

• PLAYING AND GAMES CARD COATINGS

• A range of coatings formulated for specific slip and 'playing card feel'.

• CALLENDERING COATING

• Coating which can undergo the callendering process to result in a mirror-like finish.

• COLOURED AND PEARLESCENT COATINGS

• Colour or pearl effects for packaging and greetings cards.

• PRE-METALLIZATION COATINGS

• Coatings which enhance the reflectance and metallic effect of vacuum metalisation.

• POST-METALLIZATION COATINGS

• Coatings which seal the aluminium metalisation layer to prevent oxidation and promote ink adhesion.

• SILVER AND GOLD COATINGS

• Coatings which contain metallic pigments.

• ANTI-FOG COATINGS

• Coating which prevents film packaging from condensation misting.

• ANILOX APPLIED COATINGS

• Family of coatings especially formulated for application by anilox systems.